CVS3 Publications

Journal Publications

  1. A. Abdulaziz, A. Elsabbagh and T. Elnady, 2019. Testing and validation of a novel segmented wind turbine blade, Journal of Testing and Evaluation, Vol. 47 (5), doi:10.1520/JTE20170238.
  2. M. Kani, A. Abosrea, A. Makni, M. Taktak, M. Chabaane, T. Elnady and M. Haddar, 2019. Acoustic performance evaluation for ducts containing porous media, Applied Acoustics, Vol. 147, pp. 15-22.
  3. M. Nashed, T. Elnady and M. Åbom, 2018. Modeling of duct acoustics in the high frequency range using two-ports, Applied Acoustics, Vol. 135, pp. 37-47.
  4. K. Morishima, M. Kuno, A. Nishio, N. Kitagawa, Y. Manabe, M. Moto, F. Takasaki, H. Fujii, K. Satoh, H. Kodama, K. Hayashi, S. Odaka, S. Procureur, D. Attié, S. Bouteille, D. Calvet, C. Filosa, P. Magnier, I. Mandjavidze3, M. Riallot, B. Marini, P. Gable, Y. Date, M. Sugiura, Y. Elshayeb, T. Elnady, M. Ezzy, E. Guerriero, V. Steiger, N. Serikoff, J.-B. Mouret, B. Charlès, H. Helal and M. Tayoubi, 2017. Discovery of a big void in Khufu’s pyramid by observation of cosmic-ray muons, Nature, Vol. 552, pp. 386-390
  5. A. Abosrea, W. El-Sallamy, T. Osman and T. Elnady, 2017. Production cost development for commercial exhaust systems, Ain Shams Engineering Journal, Available online doi:10.1016/j.asej.2017.09.003
  6. C. Othmani, M. Taktak, A. Zein, T. Hantati, N. Dauchezc, T. Elnady, T. Fakhfakh and M. Haddar, 2017. Acoustic characterization of a porous absorber based on recycled sugarcane wastes, Applied Acoustics, Vol. 120, pp. 90–97.
  7. M. Farooqui, T. Elnady and W. Akl, 2016. Validation of low frequency noise attenuation using locally resonant patches, Journal of the Acoustical Society of America, Vol. 139(6), pp. 3267-3276.
  8. M. Farooqui, T. Elnady and W. Akl, 2016. Sound attenuation in ducts using locally resonant periodic aluminum patches, Journal of the Acoustical Society of America, Vol. 139(6), pp. 3277-3287.
  9. A. Okasha, T. Elnady and M. Åbom, 2016. Analysis of Pipeline Networks using Two-ports, Applied Acoustics, Vol. 109, pp. 44-53.
  10. C. Othmani, A. Zein, T. Hantati, M. Taktak, T. Elnady, T. Fakhfakh and M. Haddar, 2016. Experimental and theoretical investigation of the acoustic performance of sugarcane wastes based material, Applied Acoustics, Vol. 109, pp. 90-96.
  11. M. Farooqui, T. Elnady, R. Glav and T. Karlsson, 2015. Modeling and Characterization of a Novel Porous Metallic Foam Inside Ducts, SAE International Journal of Materials and Manufacturing, Vol. 8(3), pp. 937-945.
  12. W. Elsahar and T. Elnady, 2015. Measurement and Simulation of Two-Inlet Single-Outlet Mufflers, SAE International Journal of Passenger Cars– Mechanical Systems, Vol. 8(3), pp. 1026-1033.
  13. C. Othmani, T. Hentati, M. Taktak, T. Elnady, T. Fakhfakh and M. Haddar, 2015. Effect of Liner Characteristics on the Acoustic Performance of Duct Systems, Archives of Acoustics, Vol. 40(1), pp. 117–127.
  14. T. Elnady, M. Åbom and Y. Yang, 2014. Systematic Optimization of an Exhaust System to Meet Noise Radiation Criteria at Idle, SAE International Journal of Passenger Cars– Mechanical Systems, Vol. 7(3). doi:10.4271/2014-01-0006.
  15. Herrin, X. Hua, Y. Zhang and T. Elnady, 2014. The Proper Use of Plane Wave Models for Muffler Design, SAE International Journal of Passenger Cars– Mechanical Systems, Vol. 7(3). doi:10.4271/2014-01-0016.
  16. X. Hua, D.W. Herrin, T.W. Wu, and T. Elnady, 2013. Simulation of diesel particulate filters in large exhaust systems, Applied Acoustics, Vol. 74(12), pp. 1326–1332.
  17. T. Elnady, S. Elsaadany, and D. W. Herrin, 2011. Investigation of the Acoustic Performance of After Treatment Devices, SAE International Journal of Passenger Cars– Mechanical Systems, Vol. 4(2).
  18. T. Elnady, S. Elsaadany, and M. Åbom, 2011. Flow and Pressure Drop Calculation using Two-ports, ASME Journal of Vibration and Acoustics, Vol. 133(4), pp. 041016/1-8.
  19. M. Ramadan, W. Akl, T. Elnady, and A. Elsabbagh, 2011. Finite Element Modeling of an Acoustic Cloak for Three Dimensional Flexible Shells with Structural Excitation. Journal of Applied Physics A: Materials Science and Processing, DOI 10.1007/s00339-011-6247-x.
  20. T. Elnady, M. Åbom, and S. Allam, 2010. Modeling Perforated Tubes in Mufflers using Two-ports, ASME Journal of Vibration and Acoustics, Vol. 132(6).
  21. T. Elnady, H. Bodén, and B. Elhadidi, 2009. Validation of an Inverse Semi-Analytical Technique to Educe Liner Impedance, AIAA Journal, Vol. 47(12).
  22. T. Elnady, A. Elsabbagh, W Akl, V. Garcia-Chocano, D. Torrent, F. Cervera and J. Sanchez-Dehesa 2009. Quenching of acoustic bandgaps by flow noise, Applied Physics Letters, 94, 134104, April 2009.
  23. Saber, A., Abo El-Nasr, M. and Elbanhawy, A.Y. (2021)“Assessment of Cooling Water and Spacing Sensitivities for Fire Propagation Prevention in Cylindrical Fuel Tank Farms”. J Fail. Anal. and Preven. https://doi.org/10.1007/s11668-021-01236-1
  24. Kamel M. A, Elbanhawy A. Y. and Abo El-Nasr, M. (2021) “Quantification of deviations between grey-box and constant efficiency modeling and optimization of trigeneration systems using a data-driven RMSD indicator”. Sustainable Energy Technologies and Assessments, https://doi.org/10.1016/j.seta.2021.101195
  25. Okda S, Elbanhawy A. Y., Chernoray V., Akl W. and Elsabbagh A. (2020) “Testing of the Aerodynamic Characteristics of an Inflatable Airfoil Section” ASCE Journal of Aerospace Engineering, https://doi.org/10.1061/(ASCE)AS.1943-5525.0001187
  26. Kamel M. A., Elbanhawy A. Y. and Abo-Elnasr M (2019) “A novel methodology to compare on a system-basis between side-by-side photovoltaics and thermal collectors CCHP system and hybrid photovoltaic thermal collectors CCHP system”. Energy Conversion and Management. (https://doi.org/10.1016/j.enconman.2019.112196)
  27. Karali M. A., Specht E., Mellmann J., Refaey H. A., Salem M. R. and Elbanhawy A. Y. (2019) “Granular transport through flighted rotary drums operated at optimum-loading: Mathematical model” Journal of Drying Technology, DOI:10.1080/07373937.2019.1582062
  28. Elbanhawy A.Y, Turan A (2017) “On 'Initial Regime' Cross Flow-Induced Vibration Predictions of Rigid Cylindrical Structures with High Wake Turbulence”. Int J Astronaut Aeronautical Eng 2:008
  29. Elbanhawy A. Y. and Turan A. (2010) On Two-dimensional Predictions of Turbulent Cross-flow Induced Vibration: Forces on a Cylinder and Wake Interaction. Journal of Flow Turbulence and Combustion, 85(2):199-224
  30. Ahmed H Abdulaziz, Mohamed Hedaya, Adel Elsabbagh, Karen Holford, John McCrory, ”Acoustic Emission Wave Propagation in Glass Fibre Aluminium Honeycomb Sandwich Structures”, Journal of Composite Structures, vol. (277), (December 2021).
  31. Ahmed H Abdulaziz, Mohamed Hedaya, Adel Elsabbagh, Karen Holford, John McCrory, ”Acoustic Emission Source Location in Composite-Honeycomb Sandwich Structures”, International Journal of Renewable Energy Research, vol.(11), No.(2),pp. 851-860, (June 2021).
  32. Ahmed H Abdulaziz, John McCrory, Karen Holford, Adel Elsabbagh, Mohamed Hedaya,” Experimental Three-Point Bending Test of Glass Fibre Aluminium Honeycomb Sandwich Panel with Acoustic Emission Damage Assessment”, Accepted, Journal Insight, British Institute of Nondestructive Testing.
  33. Ahmed H Abdulaziz, John McCrory, Karen Holford, Mohamed Hedaya, Adel Elsabbagh, ‘’Effects of Honeycomb Core on Acoustic Emission Wave Propagation in Glass Fibre Composite Plates’’, Proceedings of 58th Annual Conference of British Institute of Non-Destructive Testing, Telford, UK, (September 2019).
  34. Ahmed H Abdulaziz, Mohamed Hedaya, John McCrory, Karen Holford, Adel Elsabbagh, ‘’Parametric Study of Honeycomb Composite Structure Using Open Source Finite Element Software’’, Proceedings of 27th UK Association of Computational Mechanics, London, (April 2019).
  35. Ahmed H Abdulaziz, A Elsabbagh, T Elnady,"Testing and Validation of a Novel Segmented Wind Turbine Blade", Journal of Testing and Evaluation 47 (5), 3719-3739, (2019)
  36. Ahmed H Abdulaziz, A Elsabbagh, T Elnady "Using Acoustics Emission in Validating a New Design and Manufacturing Concepts of a Horizontal Axis Wind Turbine Blade", 22nd International Congress on Sound and Vibration - Florence, Italy, (2015)
  37. Ahmed H Abdulaziz, AM Elsabbagh, WN Akl , "Dynamic and Static Characterization of Horizontal Axis Wind Turbine Blades Using Dimensionless Analysis of Scaled-Down Models", International Journal of Renewable Energy Research (IJRER) 5 (2), 404-418, (2015)

Conference Publications

  1. M. Wagih, T. Elnady and M. Åbom, 2018. Effect of Reflections on HVAC Systems Power-Based Acoustic Simulation, Inter-Noise 2018, Chicago, USA, 26-29 August.
  2. M. Wagih, T. Elnady and M. Åbom, 2018. Review of splitter silencer modeling techniques, Euro-Noise 2018, Crete, Greece, 28-31 June.
  3. M. Gaber, T. Elnady and A. Elsabbagh, 2018. Sound Source Localization in 360 Degrees Using a Circular Microphone Array, Euro-Noise 2018, Crete, Greece, 28-31 June.
  4. M. Farooqui, T. Elnady and M. Åbom, 2017. Investigation of the impedance of a micro-perforated plate with two-sided grazing flow, 173rd Meeting of the Acoustical Society of America, Boston MA, 25–29 June.
  5. M. Wagih, T. Elnady and M. Åbom, 2017. Investigation of the effect of neglecting reflections in Power-based sound in ducts, 173rd Meeting of the Acoustical Society of America, Boston MA, 25–29 June.
  6. A. Abosrea and T. Elnady, 2017. Measurement of Flow-Generated Noise inside Mufflers, SAE 2017 Noise and Vibration Conference and Exhibition, Grand Rapids, USA, 12-15 June.
  7. M. Kani, M. Amine, A. Abosrea, M. Taktak, T. Elnady, M. Chabbane, M. Haddar, 2017. Performance acoustique des matériaux poreux localisés dans un conduit. 7ième Congrès International Conception et Modélisation des Systèmes Mécaniques CMSM’2017, Hammamet, Tunisie, 27-29 March.
  8. A. Allam and T. Elnady, 2016. Characterization of Mufflers, ICA 2016, Buenos Aires, Argentina, September 5-9.
  9. M. Farooqui, T. Elnady and M. Åbom, 2016. Measurement of Perforate Impedance with grazing flow on both Sides, 22nd AIAA/CEAS Aeroacoustics Conference, Lyon, France, May 30 – June 1.
  10. A. Abosrea, T. Elnady and W. Elsallamy, 2015. Flow generated noise inside mufflers, Inter-Noise 2015, San Francisco, USA, August 9-12.
  11. M. Wagih and T. Elnady, 2015. Modeling industrial mufflers using two-ports, Inter-Noise 2015, San Francisco, USA, August 9-12.
  12. A. Zein, T. Elnady, A. Elsabbagh and Hans Bodén, 2015. E-Laboratories for Sound and Vibration Education, 22nd International Congress on Sound and Vibration (ICSV), Florence, Italy, July 12-16.
  13. A. Abdulaziz, A. Elsabbagh and T. Elnady, 2015. Using Acoustic Emission in validating a new design and manufacturing concepts of a horizontal axis wind turbine blade, 22nd International Congress on Sound and Vibration (ICSV), Florence, Italy, July 12-16.
  14. M. Farooqui, T. Elnady, R. Glav and T. Karlsson, 2015. Modeling and Characterization of a Novel Porous Metallic Foam Inside Ducts, SAE 2015 Noise and Vibration Conference and Exhibition, Grand Rapids, USA, 23-25 June.
  15. W. Elsahar and T. Elnady, 2015. Measurement and Simulation of Two-Inlet Single-Outlet Mufflers, SAE 2015 Noise and Vibration Conference and Exhibition, Grand Rapids, USA, 23-25 June.
  16. M. Farooqui, T. Elnady and W. Akl, 2015. Low Frequency noise attenuation inside ducts using locally resonant periodic flush mounted steel patches, EuroNoise 2015, 31 May - 3 June, Maastricht.
  17. E. Zidan, T. Elnady and A. Elsabbagh, 2014. Comparison of Sound Power Prediction Models of Wind Turbines, Proceedings of the International Conference on Advances in Agricultural, Biological & Environmental Sciences (AABES-2014), Dubai, UAE, Oct 15-16, pp. 67-73.
  18. M. Wagih, T. Elnady, and M. Åbom, 2014. Analysis of Flow and Sound Propagation in HVAC Ducts Using Two-Ports, ASHRAE Summer Conference, Seattle, USA, June 28 – July 2.
  19. L. Zhou, H. Bodén, C. Lahiri, F. Bake, L. Enghardt, S. Busse-Gerstengarbe and T. Elnady, 2014. Comparison of impedance eduction results using different methods and test rigs, AIAA Aviation and Aeronautics Forum and Exposition 2014, Atlanta, USA, June 16-20.
  20. R. Kabral, L. Zhou, H. Bodén and T. Elnady, 2014. Determination of liner impedance under high temperature and grazing flow conditions, AIAA Aviation and Aeronautics Forum and Exposition 2014, Atlanta, USA, June 16-20.
  21. T. Elnady, M. Åbom, and Y. Yang, 2014. Systematic Optimization of an Exhaust System to Meet Noise Radiation Criteria at Idle, SAE 2014 World Congress and Exhibition, Detroit, USA, April 8-10.
  22. D.W. Herrin, X. Hua, Y. Zhang, and T. Elnady, 2014. The Proper Use of Plane Wave Models for Muffler Design, SAE 2014 World Congress and Exhibition, Detroit, USA, April 8-10.
  23. W. Elsahar, T. Elnady, and M. Åbom, 2013. Validation of two-port temperature models for heat dissipation in exhaust systems, 166th Meeting of the Acoustical Society of America, San Francisco, December 2-6.
  24. M. Farouqui, W. Akl, and T. Elnady, 2013. Sound attenuation in ducts using locally resonant periodic flush mounted flexible silicon aerogel patches, 166th Meeting of the Acoustical Society of America, San Francisco, December 2-6.
  25. M. Wagih, T. Elnady, and M. Åbom, 2013. Analysis of duct networks at high frequencies using two-ports, Inter-Noise 2013, Innsbruck, Austria, September 16-18.
  26. A. Okasha, T. Elnady, and M. Åbom, 2013. Acoustic response analysis of pipeline networks using two-ports, Inter-Noise 2013, Innsbruck, Austria, September 16-18.
  27. T. Elnady, W. Elsahar, and M. Åbom, 2012. Estimation of temperature drop in exhaust systems, Inter-Noise 2012, New York, USA, August 19-22.
  28. W. Elsahar, T. Elnady, and D. Herrin, 2012. Modeling DPF units beyond the plane wave range, Inter-Noise 2012, New York, USA, August 19-22.
  29. X. Hua, D. Herrin, T. Wu, and T. Elnady, 2012. Simulation of diesel particulate filters in large exhaust systems, Inter-Noise 2012, New York, USA, August 19-22.
  30. S. Elsaadany, T. Elnady, M. Åbom, and S. Boij, 2011. Optimization of Exhaust Systems to Meet the Acoustic Regulations and the Engine Specifications, 18th International Congress on Sound and Vibration, Rio de Janeiro, Brazil, July 10-14.
  31. T. Elnady, S. Elsaadany, and D. W. Herrin, 2011. Investigation of the Acoustic Performance of After Treatment Devices, SAE 2011 Noise and Vibration Conference and Exhibition, Grand Rapid, USA, May 2011.
  32. X. Hua, J. Liu, D. W. Herrin, and T. Elnady, 2011. Numerical Simulation of Diesel Particulate Filters in Exhaust Systems, SAE 2011 Noise and Vibration Conference and Exhibition, Grand Rapid, USA, May 2011.
  33. W. Akl, T. Elnady, A. Elsabbagh, and M. Ramadan, 2010. Improving acoustic cloak bandwidth using nonlinear coordinate transformations, 17th International Congress on Sound and Vibration, Cairo, Egypt, July 18-22.
  34. A. Elsaabagh, T. Elnady, and W. Akl, 2010. Using Virtual Reality Environment in the Teaching of Acoustics, 17th International Congress on Sound and Vibration, Cairo, Egypt, July 18-22.
  35. T. Elnady, M. Åbom, and S. Elsaadany, 2010. Acoustic Response Analysis of Oil & Gas Pipeline Networks to Prevent their Fatigue and Failure, 17th International Congress on Sound and Vibration, Cairo, Egypt, July 18-22.
  36. S. Elsaadany, T. Elnady, M. Åbom, and S. Boij, 2010. Insight into Exhaust Systems Optimization Techniques, 17th International Congress on Sound and Vibration, Cairo, Egypt, July 18-22.
  37. O. Mohammady, G. El-Bayoumi, M. Bayoumi, B. Elhadidi, and T. Elnady, 2010. Analysis, Design, and Implementation of a Sound Tracking System to Track a Moving Object, 17th International Congress on Sound and Vibration, Cairo, Egypt, July 18-22.
  38. T. Elnady, W. Akl, A. Elsabbagh, O. Mohammady, and Hans Bodén, 2010. Flat Sensors for Acoustic Pressure Measurements. 16th AIAA/CEAs Aeroacoustics Conference, Stockholm, Sweden, June 7-9.
  39. M. Ramadan, W. Akl, T. Elnady, and A. Elsabbagh, 2010. Finite Element Modeling of an Acoustic Cloak for Three Dimensional Flexible Shells with Structural Excitation. International Conference on Metamaterials, Photonic crystals and Plasmonics, Cairo, Egypt, February 22-25.
  40. T. Elnady, S. Elsaadany, and M. Åbom, 2009. Investigation into Modeling of Multi-Perforated Mufflers, 16th International Congress on Sound and Vibration, Krakow, Poland, July 6-9.
  41. T. Elnady, 2009. Operational Modal Analysis of Ramses II Statue, International Operational Modal Analysis Conference IOMAC, Ancona, Italy, May 2-4.
  42. A. Kamal, T. Elnady, and A.Yones, 2009. Parametric Study of Sound Attenuators for Industrial Fans, BUE Conference on Advanced Materials for Application in Acoustics and Vibration (AMAAV), Cairo, Egypt, January 4-6.
  43. W. El-Sallamy, T. Elnady, W. Akl, and T. Osman, 2009. Investigation of Active Noise Control in Ducts, BUE Conference on Advanced Materials for Application in Acoustics and Vibration (AMAAV), Cairo, Egypt, January 4-6.
  44. W. El-Sallamy, T. Elnady, T. Osman, and A. Khattab, 2009. Active Noise Control in Flow Ducts, BUE Conference on Advanced Materials for Application in Acoustics and Vibration (AMAAV), Cairo, Egypt, January 4-6.
  45. T. Elnady, S. Elsaadany, and M. Åbom, 2008. Flow and Pressure Drop Calculation using two-ports, 15th International Congress on Sound and Vibration, Daejeon, Korea, July 6-10.
  46. T. Elnady, 2007. A Platform to Measure Transmission Loss of Mufflers with Flow, Inter-Noise 2007, Istanbul, Turkey, August 28-31.
  47. T. Elnady, 2007. Vibration Measurements during the Relocation of Ramses II Statue, Inter-Noise 2007, Istanbul, Turkey, August 28-31.
  48. T. Elnady and H. Bodén, 2007. A Tempus experience: New Curriculum in Sound and Vibration Control in Egypt. 14th International Congress on Sound and Vibration, Cairns, Australia, July 9-12.
  49. T. Elnady and M. Åbom, 2006. SIDLAB: new 1D sound propagation simulation software for complex duct networks, 13th International Congress on Sound and Vibration, Vienna, Austria, July 2-6.
  50. Y. Elnemr and T. Elnady, 2006. Design, construction, and validation of a reverberation room, 13th International Congress on Sound and Vibration, Vienna, Austria, July 2-6.
  51. R. Fairbrother, M. Åbom, T. Elnady, F. Ollivier, 2006. Linear acoustic simulation and experimental characterization of a modular automotive muffler, 13th International Congress on Sound and Vibration, Vienna, Austria, July 2-6.
  52. T. Elnady, M. Musharrof, H. Bodén, B. Elhadidi, 2006. Validation of an Inverse Analytical Technique to Educe Liner Impedance with Grazing Flow, 12th AIAA/CEAS Aeroacoustics Conference, Cambridge, MA, May 8-10, 2006-2639.
  53. S. Tawfik, and T. Elnady, 2006. Arabic computer-based remediation program, a new development: Acoustic Manipulation, Central Auditory Processing Disorder “From Theory to Clinical Practice”, Marriott Hotel, Cairo, March 25-26.
  54. T. Elnady and M. Åbom, 2005. Modeling perforates in mufflers using two-ports, 12th International Congress on Sound and Vibration, Lisbon, Portugal, July. 11-14.
  55. T. Elnady and H. Bodén, 2004. Direct Calculation of Liner Impedance from its Indirect Measurement, 11th AIAA/CEAS Aeroacoustics Conference, Monterey, CA, May 23-25.
  56. T. Elnady, 2005. Investigation of Mode Scattering by Hard Strips in Lined Ducts Using Collocation, Eleventh International Conference on Aerospace Sciences and Aviation Technology, Military Technical College, Cairo, May 17-19.
  57. T. Elnady, 2005. Acoustic Network Models for Perforated Tube Mufflers, First Ain Shams International Conference on Environmental Engineering, Cairo, April 9-11.
  58. T. Elnady and H. Bodén, 2004. An Inverse Analytical Method for Extracting Liner Impedance from Pressure Measurements. 10th AIAA/CEAS Aeroacoustics Conference, Manchester, UK, May 10-12, 2004-2836.
  59. T. Elnady, H. Bodén and T. Kontio, 2004. Impedance of SDOF liners at high temperatures, 10th AIAA/CEAS Aeroacoustics Conference, Manchester, UK, May 10-12, 2004-2842.
  60. T. Elnady and H. Bodén, 2003. Mode Scattering by Hard Strips in Lined ducts. 10th International Congress on Sound and Vibration, Stockholm, Sweden, July. 7-10.
  61. T. Elnady and H. Bodén, 2003. On semi-empirical liner impedance modeling with grazing flow. 9th AIAA/CEAS Aeroacoustic Conference, Hilton Head, SC, USA, May 12-14, 2003-3304.
  62. T. Elnady and H. Bodén, 2002. Hard strips in lined ducts, 8th AIAA/CEAS Aeroacoustic Conference, Breckenridge, CO, USA, Jul. 17-19, 2002-2444.
  63. T. Elnady, 2002. Impedance modeling of acoustic liners, Sixth International Conference on Production Engineering and Design for Development (PEDD-6), Cairo, Egypt, Feb. 12-14.
  64. T. Elnady and H. Bodén, 2001. Application of the point matching method to model circumferentially segmented non-locally reacting liners, 7th AIAA/CEAS Aeroacoustic Conference, Maastricht, The Netherlands, May. 28-30, 2001-2202.
  65. T. Elnady, 2000. Noise Assessment in Egyptian Airports, Year 2000 International Airport Noise Symposium, San Diego, CA, USA, Feb. 14-16.
  66. Invited Lecture. Elbanhawy, A. Y, “Key priorities and enablers for Egypt’s decarbonisation planning”. From Waste to Energy – 3rd International Conference on New Trends for Sustainable Energy, ICNTSE 2021
  67. Mahmoud A., Naguib E., Tawfeek A. and Elbanhawy A. Y. “A computational approach to standardise prostatic resection interventions by virtual reconstruction”. 10th Int. Conf. on Intelligent Computing and Information Systems (2021), In Press.
  68. Elkarmoty M, Ameen M, Sholqamy M, Helal K, Abdelghafar K, Helal H, Elbanhawy A. Y, Tinti F, Bonduà S, Kurevija T, Malvić T, Moreau A, Chamorro C. “Geothermal Energy Capacity Building in Egypt”. World Geothermal Congress 2020+1 (October 2021), Reykjavik, Iceland.
  69. Saber, A., Abo El-Nasr, M. and Elbanhawy, A.Y. “Decentralized Control on Coolant Application Rate to Mitigate Fire Propagation in Hydrocarbon Storage Tank Farms” (Nov. 2020), 8th International Conference on Control, Mechatronics and Automation (ICCMA). Moscow, Russia.
  70. Kamel M. A., Elbanhawy A. Y. and Abo-Elnasr M (2019) “A novel methodology to compare optimized CCHP and Solar-CCHP systems based on overall system-comparison”. MIT Applied Energy “A+B” Symposium, Intl Conference on Applied Energy, Boston, USA.
  71. Elbanhawy A. Y., Domin K., Chevallier E. (2013) Numerical investigations of friction stir welding of high temperature materials. NAFEMS World Congress, Salzburg, Austria.
  72. Elbanhawy A. Y. and Turan A. (2010) Bluff Body Flow-Induced Vibration: Effect On Coherent Wake Statistics. 8th Intl. ERCOFTAC Symposium on Engineering Turbulence Modelling and Measurements, Marseille, France.
  73. Elbanhawy A. Y. and Turan A. (2010) Wake Dynamics and Response Predictions of Low Mass-Damping Circular Cylinder in High Reynolds Number Flow-Induced Vibrations. 6th IUTAM Symposium on Bluff Body Wakes and Vortex Induced Vibrations (BBVIV6), Capri Island, Italy.
  74. Elbanhawy A. Y. and Turan A. (2010) Heat Transfer and Wake Interaction Dynamics for Low Mass Damping Cylinder Undergoing Flow Induced Vibration at High Reynolds Number. Proceedings of ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting and 8th Intl. Conference on Nanochannels, Microchannels, and Minichannels, Montreal, Canada.
  75. Fouad M., El-Sawah G., and Elbanhawy A. (2006) A Comparison of CFD Model Predictions to a Real Scale Pool Fire Test. 16th Intl. Conference on Computer Theory and Applications (ICCTA2006), Alexandria, Egypt.
  76. Fouad M., El-Sawah G., and Elbanhawy A. (2006) CFD Simulation for Atrium Smoke Transport and Ventilation with Regard to Exhaust Fans’ Plugholing. 8th Intl. Congress of Fluid Dynamics and Propulsion (ICFDP 8). Sharm El-Shiekh, Egypt.
Get in Touch
Logo
CONTACT US
FOLLOW US
Get Access

Developed by Digital Learning Lab (DLL) - Faculty of Engineering - Ain Shams University. Copyright © 2020 .